AMD novinky-nejen CPU divize

[Julius]

AMD "Turbo CORE" technology




*Turbo Core kicks in when 3 or more cores (on a 6-core part) are idle,
*the frequency of those three cores is reduced to 800MHz, the voltage to the entire chip is increased,
*the remaining three cores are turboed up by as much as 500MHz.
...link

[flanker]

nejen x2 555 a x4 955/965 v C3 revizi, ale dočkáme se veeeelmi brzy i dalších modelů C3 revize:
http://www.cpu-world.com/news_2010/imag ... _X2_C3.jpg

nahoře: Athlon X2 245/250/255
níže: Athlon X3 405/435/440
http://www.cpu-world.com/news_2010/imag ... _X3_C3.jpg

a zde: Athlon X4 605e/630/635/
http://www.cpu-world.com/news_2010/imag ... _X4_C3.jpg

Doporučuji proto zájemcům o koupi nových procesorů řady Athlon ještě posečkat na tuto revizi, C3 disponuje nejen zlepšenými provozními vlastnostmi na takt, ale také případným lepším overclockingem.

http://www.cpu-world.com/news_2010/2010040201_Athlon_II_revision_C3_pictures.html

[flanker]

A už je máme v retailu


http://en.expreview.com/2010/04/10/amd-phenom-ii-x6-1055t-processor-hits-retail-in-china/7035.html

[flanker]

netřeba komentáře ....X6 1090T a 1050T v pár benchmarích

http://www.extrahardware.cz/forum/viewtopic.php?f=2&t=12071&p=178332#p178332

[Julius]

Phenom II X6 1090T BE benched "Great value for money"

CPU: AMD Phenom II X6 1090T BE @ 3.2GHz
MB: MSI 790GX-G65 BIOS:4.0
RAM: A-data DDR3 1333 2GB*2
PSU: acbel 300w



Super Pi V1.6：1M 21.435s
CPU Mark 99 444
wprime V2.0：32M 8.24s
3DMark Vantage 16430
3DMark 06 5673
Winrar 3.9 3015KB/s
CPU Queen 29636
...link

OC X4(6) 1090T=4218,9MHz@1,408V

[flanker]

Krasavci

pár dalších benchmarků:
http://www.extrahardware.cz/forum/viewtopic.php?f=2&t=12071

[Shatterhand]

Tomu vyššiemu screenu neverím, nie je možné, aby stačilo tak malé napätie...a potom skok skoro o 0,5V. To jednoducho nie je normálne...

[AmOK]

Nemyslim, ze je to fake. Su to dva rozne procaky, 1035T a 1090T. Ten rozdiel je sice len 370MHz, ale pri extremnom pretaktovani je normalne, ze na dosiahnutie maximalnej moznej frekvencie je treba sialene zvysovat volty. Vcore a ziskana fq je potom vo velmi velkej neumere. Funguju tak aj Phenomy II a Thuban vychadza z rovnakej architektury... Ta "fake" validacia je starsia a je to od toho isteho cloveka. Mozno nestihalo chladenie, tak si 1,93V s 1035T nemohol dovolit, alebo to nemalo uz ziadny efekt. 1035T je urcite o kusok horsie jadro ako 1090T BE, potom je to s tymi voltami logicke.
http://valid.canardpc.com/show_oc.php?id=1124114
http://valid.canardpc.com/show_oc.php?id=1132113
http://hwbot.org/community/submission/9 ... 921.13_mhz
http://hwbot.org/community/submission/9 ... 292.46_mhz

[Shatterhand]

Veď ja viem, že sú rôzne, viem, že vo "výškach" už treba "veľa peňazí na málo muziky navyše", ale predsa mi je to takmer neuveriteľné, pretože ten druhý má lepšie jadro...a na +370MHz oproti slabšiemu jadru potrebuje neuveriteľných +0,5V? To je naozaj trošku moc. Asi musel byť "veľký babrák"(obrazne povedané, aj tak úctyhodný výsledok), keď taktoval ten 1095T

[AmOK]

Je aj dost mozne a pravdepodobne, ze tych +0,5V potreboval na poslednych 100MHz a ten Black dal s 1,425V o 270MHz viac ako 1035T.
Ale tazko povedat, ked som pri tom nebol.
Je to sice neplatna validacia, ale take som mal jeden cas s 720BE vsetky aj ked som neodrbaval, tak to berem s rezervou, chyba programu, alebo poskodeny subor cpuz.cvf, zle detekovane Vcore (aj ked to asi tazko, lebo je to stale ta ista doska)..
Na druhej strane sa koli takej blbosti urcite hadat nebudeme, ked sa o jednej aj druhej variante da len teoretizovat.
Uvidime neskor, ako sa tie procaky spravaju a ci je to Vcore realne, alebo nie. Ked bude viac vysledkov z roznych zdrojov. Zatial to vyzera velmi fajn.

[flanker]

já si myslím, že jen zle detekovaný vcore

[Julius]

AMD shipping Fusion Llano samples
The first two Fusion products - Llano and Ontario - are well on track for production by end 2010, with release scheduled for early 2011.
Llano is basically a 32nm APU which combines four Phenom II cores with 400 DX11 SPs from the HD 5000 family, for a powerful mainstream CPU+GPU solution.
Basically, what we are looking at is a HD 5670 type GPU and a Phenom II quad core CPU in one die - a remarkable achievement.
Llano will be dual, triple of quad core products, with TDP ranging from 20W to 59W - aimed at notebooks, part of the Sabine platforms.
Desktop oriented Llano APUs will fill the Lynx platform, and TDPs can be expected to be higher.
Of course, the entire die is fabricated at the 32nm SOI process - including the GPU part.
In addition to Llano comes the power efficient Ontario part, based on a new architecture - Bobcat.
It will be a dual core CPU, with AMD claiming "90% of mainstream performance" at under 10W TDP and half the die size.
AMD's first fusion part, Llano, is on track for an early 2011 release, right alongside Intel's Sandy Bridge.
Ontario will also release in early 2011.
Interestingly, there is no new of AMD's next-generation Bulldozer CPUs, which are still on schedule for a vague release timeline of "2011"...

...link
...link

[flanker]

první quartál 2010 AMD
http://www.techpowerup.com/120223/AMD_Reports_Record_First_Quarter_Revenue.html

[1adad1]

960t budu vraj odomknutelne
http://www.pc.sk/modules.php?name=quick_news&what=read&id=2427

[flanker]

AMD shipping Fusion Llano samples
The first two Fusion products - Llano and Ontario - are well on track for production by end 2010, with release scheduled for early 2011.
Llano is basically a 32nm APU which combines four Phenom II cores with 400 DX11 SPs from the HD 5000 family, for a powerful mainstream CPU+GPU solution.
Basically, what we are looking at is a HD 5670 type GPU and a Phenom II quad core CPU in one die - a remarkable achievement.
Llano will be dual, triple of quad core products, with TDP ranging from 20W to 59W - aimed at notebooks, part of the Sabine platforms.
Desktop oriented Llano APUs will fill the Lynx platform, and TDPs can be expected to be higher.
Of course, the entire die is fabricated at the 32nm SOI process - including the GPU part.
In addition to Llano comes the power efficient Ontario part, based on a new architecture - Bobcat.
It will be a dual core CPU, with AMD claiming "90% of mainstream performance" at under 10W TDP and half the die size.
AMD's first fusion part, Llano, is on track for an early 2011 release, right alongside Intel's Sandy Bridge.
Ontario will also release in early 2011.
Interestingly, there is no new of AMD's next-generation Bulldozer CPUs, which are still on schedule for a vague release timeline of "2011"...

...link
...link

Ale ej, nneí to zas tak dávno, co se o Bulldozeru mluvilo, samply již se chystají také k zaslání. Jen si myslím, že veškeré informace o Bulldozeru se drží co nejvíc pod pokličkou.